Description
The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can be operated from 8.5 V to 45 V and deliver up to approx. 1.5 A per phase without a heat sink or airflow (absolute maximum is 2.5 A per phase).
The stepper motor controller has reverse-voltage protection for motor power supplies up to 40 V. This version is sold unassembled, so soldering is required before it can be used.
There is also a version available with the terminal blocks and header pins already attached, requiring no soldering.
Features:
- Speed or position control of a bipolar stepper motor
- USB for direct connection to a computer
- TTL serial at 5 V for use with a microcontroller
- I2C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
- Quadrature encoder input for use with a rotary encoder dial. Allows unlimited full rotation (not intended for position feedback)
- STEP / DIR inputs for compatibility with existing stepper motor control firmware
- Acceleration and deceleration limiting
- Maximum step rate: 50,000 steps per second
- Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds at reduced resolution).
- Six different microstepping resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step
- Digitally adjustable current limit
- Optional safety controls to prevent unexpected power to the motor
- Input calibration and adjustable scaling for analog and RC signals
- 5 V regulator (no external logic power supply required)
- Optional kill switch inputs
- Connects to a computer via USB using a USB-A to Micro-B cable (not included)
- Free configuration software for Windows, Linux and MacOS
Specifications:
- Motor driver: DRV8825
- Control interfaces: USB, non-inverted TTL serial, I2C, RC servo pulses, analog signal, quadrature encoder
- Minimum operating voltage: 8.5 V
- Maximum operating voltage: 45 V
- Continuous current per phase: 1.5 A
- Maximum current per phase: 2.5 A
- Maximum step rate: 50000 PPS
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16 and 1/32
- Reverse voltage protection: Yes
- Header pins soldered: No
Documents:
Encrypted payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Customs tariff number:
Country of origin:
This depends on where you are located. Once the order has been handed over to UPS, the delivery time in Germany is approx. 2-3 days, within Europe approx. 1 week.
We dispatch our articles with our shipping partner UPS.
If we have not yet answered your question, you can contact us and we will get back to you as soon as possible.