Waveshare 10.3" e-Paper e-Ink Display HAT, 1872 x 1404

Waveshare (18436) 10.3 inch e-Paper E-Ink Raw Display, 1872 x 1404 pixels, Black / White, 2-16 Grayscale, Parallel Port, without PCB

Note: Because the screen of 10.3 inch e-paper is large, the glass plate and FPC are fragile, so please be careful when using it for development. It is recommended to reinforce the FPC with adhesive tape when developing. Please connect all cables before powering the device, because the device does not support hot plug.

10.3 inch EPD (Electronic Paper Display) HAT for Raspberry Pi, 1872 x 1404 resolution, with embedded controller IT8951, USB/SPI/I80/I2C interface, supports partial refresh.
It has the advantages of low power consumption, wide viewing angle and clear display under direct sunlight, and is widely used in display applications such as e-book readers, e-ink displays and industrial instruments.

Features:

• No backlight, displays the latest content for a long time even in case of power failure.
  
• Low power consumption, power is basically only needed for updating.
  
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  
• USB/SPI/I80/I2C interface, for connection to host boards such as Raspberry Pi/Nucleo, etc.
  
• Comes with online development resources and manual (Raspberry Pi/STM32 examples).

Specifications:

• Operating voltage: 5 V
  
• Interface: USB/SPI/I80
  
• External dimensions: 216.70 x 174.40 x 0.78 mm
  
• Display size: 209.66 x 157.25 mm
  
• Point spacing: 0.112 x 0.112 mm
  
• Resolution: 1872 x 1404
  
• Display color: black, white
  
• Grayscale: 2-16 (1-4 bit)
  
• Full refresh time: <1s
  
• Total refresh power: 1.2 W (typ.)
  
• Total standby power: 0.1 W (typ.)
  
• Viewing angle: >170°
  
• Operating temperature: 0 ~ 50 °C
  
• Storage temperature: -25 ~ 70 °C

Left:

• Wiki